Dell Precision Tower 3420 Owner'S Manual Download Page 49

Page: 49 / 53

Table 27. Drives

Feature

Specification

Externally accessible (5.25-inch drive bay)

Mini Tower

Two

Small Form Factor

One slim optical drive bay

Internally accessible

3.5-inch SATA drive
bays

2.5-inch SATA drive
bays

PCIe drive bay

Mini Tower

Two

Four

One

Small Form Factor

One

Two

One

Table 28. External connectors

Feature

Specification

Audio

Front panel

One universal audio jack with microphone in and
headphone connector

Back panel

One line-out connector

Network adapter

One RJ-45 connector

Serial

One 9-pin connector; 16550 C compatible

USB 2.0

Front panel: two

Back panel: two

USB 3.0

Front panel: two

Back panel: four

HDMI out

One

Video

• 15-pin VGA connector
• two 20-pin DisplayPort connectors

NOTE: Available video connectors may vary based
on the graphics card selected.

Table 29. Internal connectors

Feature

Specification

PCI 2.3 data width (maximum) - 32 bits

Mini Tower

One 120-pin connector

Small Form Factor

None

PCI Express x4 data width (maximum) - four PCI Express lane

Mini Tower

One 64–pin connector

Small Form Factor

One 64–pin connector

Summary of Contents for Precision Tower 3420






















































Search results

Summary of Contents for Precision Tower 3420

Reviews:

Related manuals for Precision Tower 3420

Brands by name

Popular brands

Dell Precision Tower 3420, Owner'S Manual

Search results

Summary of Contents for Precision Tower 3420

Reviews:

Related manuals for Precision Tower 3420

Brands by name

Popular brands