Dell Precision Tower 3420 Owner'S Manual Download Page 35 | Manualshive

Page: 35 / 53

background image

Option

Description

Wake on LAN/WLAN

This option allows the computer to power up from the off state when
triggered by a special LAN signal. Wake-up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power
supply.
•

Disabled

(Default)

• LAN Only
• WLAN Only
• LAN or WLAN
• LAN with PXE Boot

Block Sleep

Allows you to block entering to sleep (S3 state) in OS Environment.
Block Sleep (S3 State)

This option is disabled by default.

Intel Ready Mode

This option allows you to enable the capability of Intel Ready Mode
Technology.
Enable Intel Ready Mode (this option is disabled by default)

Table 11. POST behavior

Option

Description

Numlock LED

Allows you to specify if the NumLock function is enabled when the system

boots. This option is enabled by default.

MEBx Hotkey

Allows you to specify whether the MEBx Hotkey function should be

enabled when the system boots. This option is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This

option is enabled by default.

Table 12. Virtualization support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize

the additional hardware capabilities provided by Intel Virtualization
technology.
•

Enable Intel Virtualization Technology

- This option is enabled by

default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the

additional hardware capabilities provided by Intel Virtualization technology
for direct I/O.
•

Enable VT for Direct I/O

- This option is enabled by default.

Trusted Execution

Allows you to specify whether a Measured Virtual Machine Monitor

(MVMM) can utilize the additional hardware capabilities provided by Intel
Trusted Execution Program.
•

Trusted Execution

- This option is disabled by default.

35

«
...
33
34
35
36
37
...
»

Summary of Contents for Precision Tower 3420






















































Reviews:

No comments

Related manuals for Precision Tower 3420

Brand: @Xi Computer Corporation Pages: 118

Brand: Aaeon Pages: 44

Power Panel 300

Brand: B&R Industries Pages: 612

Brand: NUANCE Pages: 2

VAIO VPCYB15KX/S

Brand: Sony Pages: 2

VAIO VPCZ122GX/S

Brand: Sony Pages: 3

VAIO VPCYB14KX/P

Brand: Sony Pages: 2

Brand: Sony Pages: 2

VAIO VPCY216FX/V

Brand: Sony Pages: 3

VAIO VPCY216FX/S

Brand: Sony Pages: 3

VAIO VPCY216FX/L

Brand: Sony Pages: 3

Brand: Sony Pages: 10

VAIO VPCY115FX/BI

Brand: Sony Pages: 2

VAIO VPCW211AX/L

Brand: Sony Pages: 2

VAIO VPCW1 Series

Brand: Sony Pages: 2

VAIO VPCSE1DGX/B

Brand: Sony Pages: 2

VAIO VPCSE1CFX/B

Brand: Sony Pages: 2

VAIO VPCSE16FX/S

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands