Installing the processor
1.
Align the processor with the socket keys.
2.
Align the pin-1 indicator of the processor with the triangle on the socket.
3.
Place the processor on the socket such that the slots on the processor align with the socket keys.
4.
Close the processor shield by sliding it under the retention screw.
5.
Lower the socket lever and push it under the tab to lock it.
6.
Install the:
a.
heat sink
b.
hard drive
c.
front bezel
d.
cover
7.
Follow the procedure in
After Working Inside Your Computer
.
Removing the system board
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
front bezel
c.
hard drive
d.
optical drive
e.
heat sink fan cover
f.
heat sink
g.
system fan
h.
memory module
i.
PCIe SSD
3.
Disconnect the cables from the system board.
24