Dell Precision T5400, Quick Reference Manual

Page: 33 / 394

Quick Reference Guide
33
Beep Codes
Your computer may emit a series of beeps during start up. The series of beeps
is called a beep code and can be used to help identify a problem with your
computer.
If your computer emits a series of beeps during start-up:
1 Write down the beep code.
2 Run the Dell Diagnostics to identify the cause (see "Dell Diagnostics" on
page 36).
Code Cause
2 short, 1 long BIOS checksum error
1 long, 3 short, 2 short Memory error
1 short F12 key pressed
Code
(repetitive
short beeps) Description Suggested Remedy
1 BIOS checksum
failure. Possible
motherboard failure. Contact Dell (see "Contacting Dell" in
your
User’s Guide ).
2 No memory modules
are detected. • If two or more memory modules are
installed, remove the modules
(see "Memory" in your
User’s Guide ),
reinstall one module, and then restart
the computer. If the computer starts
normally, continue to install additional
memory modules (one at a time) until
you have identified a faulty module or
reinstalled all modules without error.
• If available, install working memory of
the same type into your computer
(see "Memory" in your
User’s Guide ).
• If the problem persists, contact Dell (see
"Contacting Dell" in your User’s Guide ).
3 Possible motherboard
failure. Contact Dell (see "Contacting Dell" in
your
User’s Guide ).