Dell Precision T5400, Quick Reference Manual

Page: 51 / 394

Quick Reference Guide
51
U
N L O C K T H E S C A N N E R
—
Ensure that your scanner is unlocked (if the scanner has
a locking tab or button).
R
E S T A R T T H E C O M P U T E R A N D T R Y T H E S C A N N E R A G A I N
C
H E C K T H E C A B L E C O N N E C T I O N S
—
• See the scanner documentation for information on cable connections.
• Ensure that the scanner cables are securely connected to the scanner and the computer.
V
E R I F Y T H A T T H E S C A N N E R I S R E C O G N I Z E D B Y
M
I C R O S O F T
W
I N D O W S
—
Windows XP :
1
Click Start
→
Control Panel
→
Printers and Other Hardware
→
Scanners and Cameras .
2
If your scanner is listed, Windows recognizes the scanner.
Windows Vista :
1
Click
Start
→
Control Panel
→
Hardware and Sound
→
Scanners and Cameras .
2
If the scanner is listed, Windows recognizes the scanner.
R
E I N S T A L L T H E S C A N N E R D R I V E R
— See the scanner documentation for instructions.
Sound and Speaker Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
No sound from speakers
NOTE:
The volume control in MP3 and other media players may override the
Windows volume setting. Always check to ensure that the volume on the media
player(s) has not been turned down or off.
C
H E C K T H E S P E A K E R C A B L E C O N N E C T I O N S
— Ensure that the speakers are connected
as shown on the setup diagram supplied with the speakers. If you purchased a sound card,
ensure that the speakers are connected to the card.
E
N S U R E T H A T T H E S U B W O O F E R A N D T H E S P E A K E R S A R E T U R N E D O N
— See the
setup diagram supplied with the speakers. If your speakers have volume controls, adjust
the volume, bass, or treble to eliminate distortion.
A
D J U S T T H E
W
I N D O W S V O L U M E C O N T R O L
— Click or double-click the speaker icon
in the lower-right corner of your screen. Ensure that the volume is turned up and that
the sound is not muted.
D
I S C O N N E C T H E A D P H O N E S F R O M T H E H E A D P H O N E C O N N E C T O R
— Sound from the
speakers is automatically disabled when headphones are connected to the computer’s
front-panel headphone connector.