Dell Precision R5400 User Manual Download

Page: 54 / 111

TERA1x00 PC-over-IP Administrative Interface User Manual

TER0606004 Issue 3

Page 54 of 111

This option is only available on a Portal; on the Host it is disabled and non-editable.

1.9 Upload

The

Upload

menu contains links to pages that can be used to upload files to the

device. The webpages in the

Upload

menu are:

•

Firmware

•

OSD Logo

Figure 34: Upload Menu Navigation

1.9.1 Firmware

The

Firmware

webpage allows the upload of a new firmware build to the Portal or

Host.

Figure 35: Firmware Upload Webpage

1.9.1.1 Firmware build filename

The

Firmware build filename

field specifies the filename of the firmware image to

be uploaded. The administrator can browse to the file via the

Browse

button. The

file must be accessible to the web browser (i.e., on a local or accessible network
drive). The firmware image must be an ’.all’ file.

Summary of Contents for Precision R5400
















































































































Search results

Summary of Contents for Precision R5400

Reviews:

Related manuals for Precision R5400

Brands by name

Popular brands

Dell Precision R5400, User Manual

Search results

Summary of Contents for Precision R5400

Reviews:

Related manuals for Precision R5400

Brands by name

Popular brands