TERA1x00 PC-over-IP Administrative Interface User Manual
TER0606004 Issue 3
© 2008 Teradici Corporation
Page 71 of 111
Figure 49: Reset
2.3.9.1 Reset Parameters
The
Reset Parameters Reset
button resets all configuration and permissions to
factory default values. When this button is selected, the OSD will prompt the
administrator for confirmation to prevent accidental resets.
2.4 Diagnostics
The
Diagnostics
window allows the administrator to access the window tabs with
diagnostics concerning the Portal. The tabs in the
Diagnostics
window are:
•
Event Log
•
Session Statistics
•
PCoIP Processor
•
Ping
Each tab has an associated
Close
button to close the window.
2.4.1 Event
Log
The
Event Log
tab allows viewing and clearing of event log messages from the
Portal.
Note: The Event Log (terse or verbose) can also be initiated using the Webpage
Administration Interface. See Section 1.7.1 Event Log.
