Dell Precision Mobile Workstation M4700 Owner'S Manual Download Page 62

Page: 62 / 89

Option

Description

•

Enable SMART Reporting - This option

is disabled by default.

USB Configuration

Allows you to define the USB configuration.

The options are:

•

Enable Boot Support

•

Enable External USB Port

Default Setting: both the options are enabled.

USB PowerShare

Allows you to configure the behavior of the

USB PowerShare feature. The option is

disabled by default.

•

Enable USB PowerShare

Miscellaneous Devices

Allows you enable or disable the various on

board devices. The options are:

•

Enable Fixed Bay

•

Enable Microphone

•

Enable ExpressCard

•

Enable eSATA Ports

•

Enable Camera

•

Enable Hard Drive Free Fall Protection

•

Enable Media Card and 1394

•

Enable Media Card Only

•

Disable MC, 1394

Default Setting: The highlighted devices are

enabled.

Table 4. Video

Option

Description

LCD Brightness

Allows you to set the panel brightness when the ambient sensor is Off.

Optimus

Allows you to enable or disable the NVIDIA Optimus technology.

•

Enable Optimus - Default Setting.

Table 5. Security

Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.

NOTE: You must set the admin password before you set the system or hard

drive password.

NOTE: Successful password changes take effect immediately.

NOTE: Deleting the admin password automatically deletes the system

password and the hard drive password.

Summary of Contents for Precision Mobile Workstation M4700


























































































Search results

Summary of Contents for Precision Mobile Workstation M4700

Reviews:

Related manuals for Precision Mobile Workstation M4700

Brands by name

Popular brands

Dell Precision Mobile Workstation M4700, Owner'S Manual

Search results

Summary of Contents for Precision Mobile Workstation M4700

Reviews:

Related manuals for Precision Mobile Workstation M4700

Brands by name

Popular brands