manualshive.com logo in svg

Dell Precision M6600, Owner'S Manual

Share
Download
Dell Precision M6600 Owner'S Manual Download Page 127

Default Setting: Enable Fn Key Emulation is

selected.

POST HotKeys

Allows you to enable the sign-on screen
message display indicating the keystroke
sequence to access the System Setup
option menu.
Default Setting: Enable F12 Boot Option

Menu is selected.

Fastboot

Allows you to set the option to speed up
the boot process. The options are:

•

Minimal

•

Thorough

•

Auto

Default Setting: Thorough

Virtualization Support
The following table describe the menu options of the Virtualization Support

menu.

Option

Description

Virtualization

Allows you to enable or disable the Intel
Virtualization Technology.
Default Setting: Enable Intel Virtualization

Technology is selected.

VT for Direct I/O

Allows you to enable or disable
Virtualization Technology for Direct I/O.
Default Setting: Disabled is selected.

Trusted Execution

This option specifies wether a Measured
Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities
provided by Intel Trusted Execution
Technology. The TPM Virtualization
Technology and Virtualization Technology
for Direct I/O must be enabled to use this
feature.
Default Setting: Disabled is selected.

Wireless
The following table describe the menu options of the Wireless menu.

127

Summary of Contents for Precision M6600









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands