manualshive.com logo in svg

Dell Precision M6600, Owner'S Manual

Share
Download
Dell Precision M6600 Owner'S Manual Download Page 126

ExpressCharge

Allows you to enable or disable the
ExpressCharge feature. The options are:

•

Standard

•

ExpressCharge

Default Setting: ExpressCharge

POST Behavior
The following table describe the menu options of the POST Behavior menu.

Option

Description

Adapter Warnings

Allows you to enable or disable the system
setup (BIOS) warning messages when you
use certain power adapters.
Default Setting: Enable Adapter Warnings

is selected.

Keypad (Embedded)

Allows you to choose one or two methods
to enable the keypad that is embedded in
the internal keyboard.

•

Fn Key Only

•

By Num Lk

Default Setting: Fn Key Only

Mouse/Touchpad

Allows you to define how the system
handles mouse and touchpad input. The
options are:

•

Serial Mouse

•

PS2 Mouse

•

Touchpad/PS-2 Mouse

Default Setting: Touchpad/PS-2 Mouse

Numlock Enable

Allows you to enable the Numlock option
when the computer boots.
Default Setting: Enable Numlock is

selected.

Fn Key Emulation

Allows you to set the option where the
<Scroll Lock> key is used to simulate the
<Fn> key feature.

126

Summary of Contents for Precision M6600









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands