manualshive.com logo in svg

Dell Precision M6600, Owner'S Manual

Share
Download
Dell Precision M6600 Owner'S Manual Download Page 118

Option

Description

System Information

This section lists the primary hardware
features of your computer.

•

System Information

•

Memory Information

•

Processor Information

•

Device Information

Battery Information

Displays the battery status and the type of
AC adapter connected to the computer.

Boot Sequence

Allows you to change the order in which
the computer attempts to find an operating
system.

•

Diskette Drive

•

Internal HDD

•

USB Storage Device

•

CD/DVD/CD-RW Drive

•

Onboard NIC

•

Cardbus NIC

You can also choose the Boot List option.

The options are:

•

Legacy

•

UEFI

Date/Time

Allows you to change the date and time.

System Configuration
The following table describe the menu options of the System Configuration

menu.

Option

Description

NOTE: System Configuration contains options and settings related to integrated
system devices. Depending on your computer and installed devices, the items listed
in this section may or may not appear.

Integrated NIC

Allows you to configure the integrated
network controller. The options are:

118

Summary of Contents for Precision M6600









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands