manualshive.com logo in svg

Dell Precision M6600, Owner'S Manual

Share
Download
Dell Precision M6600 Owner'S Manual Download Page 124

•

2

Default Setting: All

Intel SpeedStep

Allows you to enable or disable the Intel
SpeedStep feature.
Default Setting: Enabled

C-States Control

Allows you to enable or disable the
additional processor sleep states.
Default Setting: The options C states, C3,

C6, Enhanced C-states, and C7 options are

selected/enabled.

Limit CPUID

Allows you to limit the maximum value the
processor Standard CPUID Function will
support.
Default Setting: Enable CPUID Limit

Intel TurboBoost

Allows you to enable or disable the Intel
TurboBoost mode of the processor.
Default Setting: Enabled

HyperThread Control

Allows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled

Power Management
The following table describe the menu options of the Power Management menu.

Option

Description

AC Behavior

Allows you to enable or disable the
computer from turning on automatically
when an AC adapter is connected.
Default Setting: Disabled

Auto On Time

Allows you to set the time at which the
computer must turn on automatically. The
options are:

•

Disabled

•

Every Day

•

Weekdays

124

Summary of Contents for Precision M6600









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands