4.
Remove the keyboard:
a.
Remove the two M2.5 x 6-mm screws across the top of the keyboard.
b.
Rotate the keyboard up and slide it forward.
c.
Hold the keyboard up and slightly forward to allow access to the keyboard connector.
d.
Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.
Back to Contents Page
1 center control cover
2 system board connector
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
1 M2.5 x 6-mm screws (2)
2 keyboard
3 palm rest
