6.
Replace the cover and tighten the screw.
Modem
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer over, and loosen the captive screw from the Mini PCI card/modem cover.
3.
If a modem is not already installed, go to
step 4
. If you are replacing a modem, remove the existing modem:
a.
Remove the screws securing the modem to the system board, and set it aside.
b.
Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board, and disconnect the modem cable.
1
Mini PCI card
2
antenna cables (2)
CAUTION:
Before working inside your computer, read the safety instructions in your
System Information
Guide
.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE:
Handle components and cards by their edges, and avoid touching pins and contacts.
1 captive screw
2 Mini PCI card/modem cover
