Option
Description
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
Disabled
•
AHCI
•
RAID On
(default)
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
SATA-0
•
SATA-1
•
SATA-2
•
SATA-3
•
M.2 PCIe SSD-2
SMART Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
Enable SMART Reporting
USB Configuration
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
•
Enable USB Boot Support
(default)
•
Enable Front USB Ports
(default)
•
Enable Rear USB Ports
(default)
NOTE:
USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
Front USB
Configuration
This field enables or disables the front USB configuration
•
Front Port 1 (Bottom Right)*: This option is enabled by default.
•
Front Port 2 (Bottom Left)*: This option is enabled by default.
•
Front Port 1 with Power Share (Top Right)
•
Front Port 2 (Top Left)
* denotes a USB 3.0-capable port
Rear USB
Configuration
This field enables or disables the rear USB configuration
•
Rear Port 1 (Bottom Right)
•
Rear Port 2 (Bottom Left)
•
Rear Port 3 (Top Left)
•
Rear Port 4 (Top Right)
* denotes a USB 3.0-capable port
Audio
This field enables or disables the integrated audio controller. By default, the
Enable Audio
option is selected. The
options are:
•
Enable Microphone: This option is enabled by default.
Miscellaneous
Devices
Allows you to enable or disable the following devices:
•
Enable PCI Slot
•
Enabled Secure Digital (SD) Card (default)
NOTE:
All devices are enabled by default.
System setup
59
Summary of Contents for Precision 3440 Small Form Factor
