System setup
System setup enables you to manage your desktop hardware and specify BIOS level options. From the System setup, you can:
•
Change the NVRAM settings after you add or remove hardware
•
View the system hardware configuration
•
Enable or disable integrated devices
•
Set performance and power management thresholds
•
Manage your computer security
Topics:
•
•
•
•
System Configuration screen options
•
•
•
•
Intel Software Guard Extensions screen options
•
•
Power Management screen options
•
•
Virtualization support screen options
•
•
Advanced configuration options
•
•
•
SupportAssist System Resolution
•
•
Updating your system BIOS using a USB flash drive
•
Accessing System Setup
Steps
1. Turn on (or restart) your computer.
2. After the white Dell logo appears, press F2 immediately.
The System Setup page is displayed.
NOTE:
If you wait too long and the operating system logo appears, wait until you see the desktop. Then, shut down
or restart your computer and try again.
NOTE:
After the Dell logo appears, you can also press F12 and then select BIOS setup.
Navigation Keys
The following table displays the system setup navigation keys.
NOTE:
For most of the system setup options, changes that you make are recorded but do not take effect until you re-
start the system.
3
System setup
57
Summary of Contents for Precision 3440 Small Form Factor
