Dell Precision 3440 Small Form Factor Service Manual Download Page 53 | Manualshive

Page: 53 / 76

background image

Steps

1. Remove the screw (6-32) that secures the I/O panel to the system chassis.
2. Lift the I/O panel away from the system chassis.
3. Disconnect the intrusion switch cable from the connector on the system board.
4. Disconnect the system board power supply cables.
5. Disconnect the power button switch cable from the connector on the system board.
6. Disconnect the system fan cable to the connector on the system board.
7. Disconnect the processor power supply cable from the connector on the system board.
8. Disconnect the SATA cables from the connector on the system board.
9. Disconnect the SATA power cable from the connector on the system board.
10. Disconnect the internal speaker cable from the connector on the system board.
11. Remove the four Screws (6-32) and the single standoff screw (M2X4) that secure the system board.
12. Lift the system board at an angle and slide it out of the system chassis.

Installing the system board

Prerequisites

About this task

The following image indicates the location of the system board and provides a visual representation of the installation procedure.

Disassembly and reassembly

53

«
...
51
52
53
54
55
...
»

Summary of Contents for Precision 3440 Small Form Factor













































































Reviews:

No comments

Related manuals for Precision 3440 Small Form Factor

Brand: Vecow Pages: 172

ACE-6000 Series

Brand: Acewell Pages: 2

WM342-KD Series

Brand: DFI Pages: 12

Brand: UCOM Pages: 3

Brand: Vecow Pages: 33

Brand: Digital Equipment Pages: 96

eon 5000 Series

Brand: Neoware Pages: 40

Brand: Intel Pages: 10

Brand: Vivo Pages: 3

Brand: Dell Pages: 77

FocusPRO 6000 Series

Brand: Honeywell Pages: 64

X-Superteam XPS-100

Brand: Honeywell Pages: 40

Brand: Honeywell Pages: 69

Brand: Honeywell Pages: 39

Brand: Honeywell Pages: 78

Brand: Honeywell Pages: 39

Brand: Honeywell Pages: 133

Brand: Honeywell Pages: 159

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands