Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the
.
2. Install the
3. Install the
.
4. Follow the procedure in
after working inside your computer
.
Heat sink
Removing the heat-sink
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
About this task
The following images indicate the location of the heat-sink and provide a visual representation of the removal procedure.
38
Disassembly and reassembly
Summary of Contents for Precision 3440 Small Form Factor
