manualshive.com logo in svg

Dell PowerVault MD1 Series, User Manual, Page: 159 / 207

Share
Download
Dell PowerVault MD1 Series User Manual Download Page 159

53 Unformatted flash detected

Try one or more of the following:

•

Press the arrow buttons until 

Continue

 appears, and then press   to stop the defragment operation and

continue printing.

•

Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Serial option <x> error

<x> is the number of the serial option.
Try one or more of the following:

•

Check that the serial cable is connected correctly and is the proper one for the serial port.

•

Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer

and host computer.

•

Press the arrow buttons until 

Continue

 appears, and then press   to continue printing.

•

Turn the printer off and then back on to reset the printer.

54 Network <x> software error

Try one or more of the following:

•

Press the arrow buttons until 

Continue

 appears, and then press   to continue printing.

•

Turn the printer off and then back on to reset the printer.

•

Upgrade (flash) the network firmware in the printer or print server.

54 Standard network software error

Try one or more of the following:

•

Press the arrow buttons until 

Continue

 appears, and then press   to continue printing.

•

Turn the printer off and then back on to reset the printer.

•

Upgrade (flash) the network firmware in the printer or print server.

55 Unsupported option in slot <x>

<x> is a slot on the printer system board.
Try one or more of the following:

1

Turn the printer power off.

2

Unplug the power cord from the wall outlet.

3

Remove the unsupported option card from the printer system board.

4

Connect the power cord to a properly grounded outlet.

5

Turn the printer power back on.

Understanding printer messages

159

Summary of Contents for PowerVault MD1 Series
















































































































































































































Reviews:

No comments