Dell PowerVault MD1 Series User Manual Download Page 122

Page: 122 / 207

Menu item

Description

Scheduled Method

Single pass
Multiple pass

Disk Wiping erases

only

print job data that

is not

currently in use by the file system

from the printer hard disk. All permanent data on the printer hard disk is preserved,

such as downloaded fonts, macros, and held jobs.
Both manual and scheduled wiping allow the file system to reuse marked disk space

without first having to wipe it.
Notes:

•

This menu item appears only if a formatted, non-defective printer hard disk is

installed.

•

Single pass is the default setting.

•

Highly confidential information should be wiped using the Multiple Pass

method

only

•

Scheduled wipes are initiated

without

displaying a user warning or

confirmation message.

Security Audit Log menu

Menu item

Description

Export Log

Enables an authorized user to export the security log
Notes:

•

To export the log from the printer control panel, a flash drive must be attached

to the printer.

•

From the Embedded Web Server, the log can be downloaded to a computer.

Delete Log

Delete now
Do not delete

Specifies whether audit logs are deleted
Note: Delete Now is the factory default setting.

Configure Log

Enable Audit
Enable Remote Syslog
Remote Syslog Facility
Severity of events to log

Specifies whether and how the audit logs are created
Note: Factory default settings enable the security audit log.

Set Date/Time menu

Menu item

Description

View Date/Time

Lets you view the current date and time settings for the printer

Set Date/Time

Note: Date/Time is set in YYYY-MM-DD HH:MM format.

Time Zone

Note: GMT is the factory default setting.

Understanding printer menus

122

Summary of Contents for PowerVault MD1 Series
















































































































































































































Search results

Summary of Contents for PowerVault MD1 Series

Reviews:

Related manuals for PowerVault MD1 Series

Brands by name

Popular brands

Dell PowerVault MD1 Series, User Manual

Search results

Summary of Contents for PowerVault MD1 Series

Reviews:

Related manuals for PowerVault MD1 Series

Brands by name

Popular brands