manualshive.com logo in svg

Dell PowerEdge R815, Owner'S Manual, Page: 21 / 190

Share
Download
Dell PowerEdge R815 Owner'S Manual Download Page 21

About Your System

21

Power Indicator Codes

The power supplies have indicators that show whether power is present or 
whether a power fault has occurred. 

•

Not lit—AC power is not connected.

•

Green—In standby mode, a green light indicates that a valid AC source is 
connected to the power supply and that the power supply is operational. 
When the system is on, a green light also indicates that the power supply is 
providing DC power to the system.

•

Amber—Indicates a problem with the power supply.

Indicator

Indicator Code

Link and activity 
indicators are off

The NIC is not connected to the network.

Link indicator is green

The NIC is connected to a valid network link at 
1000 Mbps.

Link indicator is amber

The NIC is connected to a valid network link at 10 or 
100 Mbps.

Activity indicator is 
green blinking

Network data is being sent or received.

book.book  Page 21  Wednesday, February 17, 2010  6:17 PM

Summary of Contents for PowerEdge R815































































































































































































Reviews:

No comments