manualshive.com logo in svg

Dell PowerEdge R815, Owner'S Manual, Page: 119 / 190

Share
Download
Dell PowerEdge R815 Owner'S Manual Download Page 119

Installing System Components

119

Figure 3-20.

Removing and Installing the RAID Battery

Installing the RAID Battery

1

Insert the RAID battery into the battery carrier in the cooling shroud. 
See Figure 3-20. 

2

Route the RAID battery cable along the chassis wall and through the slot 
in the battery carrier.

3

Tuck any cable slack into the area in front of the battery carrier slot.

4

Connect the battery cable to the connector on the integrated storage 
controller card. 

5

Replace the cooling fan assembly. See "Installing the Cooling Fan 
Assembly" on page 104.

6

Close the system. See "Closing the System" on page 77.

7

Reconnect the system to its electrical outlet and turn the system on, 
including any attached peripherals.

1

RAID battery carrier

2

RAID battery 

3

RAID battery cable

4

RAID battery carrier slot

5

cooling shroud

4

2

3

5

1

book.book  Page 119  Wednesday, February 17, 2010  6:17 PM

Summary of Contents for PowerEdge R815































































































































































































Reviews:

No comments