manualshive.com logo in svg

Dell PowerEdge R815, Owner'S Manual, Page: 101 / 190

Share
Download
Dell PowerEdge R815 Owner'S Manual Download Page 101

Installing System Components

101

 

CAUTION: 

Many repairs may only be done by a certified service technician. You 

should only perform troubleshooting and simple repairs as authorized in your 
product documentation, or as directed by the online or telephone service and 
support team. Damage due to servicing that is not authorized by Dell is not covered 
by your warranty. Read and follow the safety instructions that came with the 
product.

 

NOTE: 

The procedure for removing each individual fan module is the same.

1

Open the system. See "Opening the System" on page 76.

2

Press the release tab and lift the fan out of the cooling fan assembly. See 
Figure 3-12.

Figure 3-12.

Removing and Installing a Cooling Fan

1

fan assembly

2

release tab

3

fan module

1

2

3

2

book.book  Page 101  Wednesday, February 17, 2010  6:17 PM

Summary of Contents for PowerEdge R815































































































































































































Reviews:

No comments