manualshive.com logo in svg

Dell PowerEdge R815, Owner'S Manual, Page: 11 / 190

Share
Download
Dell PowerEdge R815 Owner'S Manual Download Page 11

About Your System

11

About Your System

Accessing System Features During Startup

The following keystrokes provide access to system features during startup.

Keystroke

Description

<F2>

Enters the System Setup program. See "Using the System Setup 
Program and UEFI Boot Manager" on page 53.

<F10>

Enters System Services, which opens the Lifecycle Controller. The 
Lifecycle Controller allows you to access utilities such as embedded 
system diagnostics. For more information, see the Lifecycle Controller 
documentation at 

support.dell.com/manuals

.

<F11>

Enters the BIOS Boot Manager or the UEFI Boot Manager, 
depending on the system's boot configuration. See "Using the System 
Setup Program and UEFI Boot Manager" on page 53.

<F12>

Starts PXE boot.

<Ctrl><E> Enters the iDRAC Configuration Utility, which allows access to the 

System Event Log (SEL) and configuration of remote access to the 
system. For more information, see the iDRAC user documentation at 

support.dell.com/manuals

.

<Ctrl><C> Enters the SAS Configuration Utility. For more information, see the 

SAS adapter documentation at 

support.dell.com/manuals

.

<Ctrl><R> Enters the PERC configuration utility. For more information, see the 

PERC card documentation at 

support.dell.com/manuals

.

<Ctrl><S> Enters the utility to configure NIC settings for PXE boot. For more 

information, see the documentation for your integrated NIC at 

support.dell.com/manuals

.

book.book  Page 11  Wednesday, February 17, 2010  6:17 PM

Summary of Contents for PowerEdge R815































































































































































































Reviews:

No comments