manualshive.com logo in svg

Dell PowerEdge R230, Owner'S Manual

Share
Download
Dell PowerEdge R230 Owner'S Manual Download Page 99

Figure 61. Removing the internal PERC card

1.

screw (2)

2.

PERC card lock

3.

PERC card

4.

LED cable connector on the PERC card

5.

PERC card LED cable

6.

PERC card connector

7.

LED cable connector on the system board

Next steps

1.

Install the internal PERC card.

2.

Install the expansion card riser.

3.

Follow the procedure listed in the After working inside your system section.

Related links

Removing the expansion card riser
Installing the expansion card riser
Installing the internal PERC card

Installing the internal PERC card

Prerequisites

1.

Follow the safety guidelines listed in Safety instructions section.

2.

Follow the procedure listed in the Before working inside your system section.

3.

Remove the expansion card riser.

4.

Keep the Phillips #2 screwdriver ready.

Steps
1.

Connect the PERC LED cable to the LED cable connector on the PERC card.

2.

Insert the PERC card in the PERC card slot.

3.

Press and slide the tab on the PERC card lock to disengage it from the slot on the chassis.

4.

Turn the internal PERC card lock to engage it with the PERC card.

5.

Install the first screw to secure the PERC card lock to the PERC card.

6.

Install the second screw to secure the PERC card to the chassis.

NOTE: Use the two screws supplied with the system to secure the PERC card to the PERC card lock and the 
chassis

7.

Connect the PERC LED cable to the LED cable connector on the system board.

99

Summary of Contents for PowerEdge R230






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands