manualshive.com logo in svg

Dell PowerEdge R230, Owner'S Manual

Share
Download
Dell PowerEdge R230 Owner'S Manual Download Page 86

Removing the cooling fan blank

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support 
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety 
instructions that are shipped with your product.

NOTE: The procedure for removing each cooling fan blank is identical.

1.

Follow the safety guidelines listed in Safety instructions section.

2.

Follow the procedure listed in the Before working inside your system section.

Steps
1.

Press the release tabs and push the cooling fan blank to disengage it from the cooling fan bracket.

2.

Lift the cooling fan blank out of the cooling fan bracket.

Figure 48. Removing a cooling fan blank

1.

cooling fan blank (2)

2.

cooling fan bracket

3.

tab 

4.

release tab (2)

Next steps

1.

Install the cooling fan.

2.

Follow the procedure listed in the After working inside your system section.

Related links

Installing a cooling fan
Installing the cooling fan blank

86

Summary of Contents for PowerEdge R230






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands