manualshive.com logo in svg

Dell PowerEdge C8220, Hardware Owner'S Manual

Share
Download
Dell PowerEdge C8220 Hardware Owner'S Manual Download Page 72

72

Using the System Setup Program

C7 State 

(

Enabled

 default)

Enables or disables the processor C7 state.

NOTE: 

This feature is visible only when the processor 

supports C7 state. 

NOTE: 

Disable this option at your own risk. When you disable 

this option, pop up message appears on the screen and 

warning appears in the System Setup Help.

XD Bit Capability 

(

Enabled

 default)

Enables or disables the processor’s Execute Disable (XD) 

Memory Protection Technology feature. 

Direct Cache Access 

(

Enabled

 default)

Enables or disables the direct cache access. 

Hyper-Threading 

Technology 

(

Enabled

 default)

Enables or disables the Hyper-Threading technology. 

Prefetch Configuration Press <Enter> to configure the prefetch settings. 

NOTE: 

This feature is available when supported by the 

processor. 

Option

Description

Summary of Contents for PowerEdge C8220

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands