manualshive.com logo in svg

Dell PowerEdge C8220, Hardware Owner'S Manual

Share
Download
Dell PowerEdge C8220 Hardware Owner'S Manual Download Page 62

62

Using the System Setup Program

Chassis Power Management

Scroll to this item and press <Enter> to view the following screen.

Chassis Power Management

Option

Description

Chassis PSU 

Configuration

Press <Enter> to configure the chassis power supply.
This option provides management and monitoring of the 

power supplies and the minimum set of requirements that 

this server must satisfy. 

Power Capping

Press <Enter> to set power capping values.
This option controls system power by node manager 

through the processor to limit power consumption in watts 

for a sled.

NOTE: 

The sled’s total power consumption does not include 

enclosure fan power energy use. The enclosure fan operates 

at a maximum of 280 W of power.

Summary of Contents for PowerEdge C8220

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands