Dell PowerEdge C8220 Hardware Owner'S Manual Download Page 121

Page: 121 / 248

Using the System Setup Program

121

48AB

Flow Control

Selects none as the flow control for console

redirection.

48AC

Flow Control

Selects hardware as the flow control for console

redirection.

48AD

Flow Control

Selects software as the flow control for console

redirection.

48AE

Terminal Type

The BIOS console redirection, if enabled, operates in

VTUTF8 emulation model. See also tokens BFh, C0h,

and D7h.

48AF

VT-UTF8 Combo

Key Support

Disables VT-UTF8 Combination Key Support for

ANSI/VT100 terminals.

48B0

VT-UTF8 Combo

Key Support

Enables VT-UTF8 Combination Key Support for

ANSI/VT100 terminals.

48B1

Event logging

Disables BIOS to log system events to BMC, errors

include ECC/PCI/PCIe/HT…etc.

48B2

Event logging

Enables BIOS to log system events to BMC, errors

include ECC/PCI/PCIe/HT…etc.

48B3

NMI on Error

Disables BIOS to generate NMI when PCIe

uncorrectable errors occur.

48B4

NMI on Error

Enables BIOS to generate NMI when PCIe

uncorrectable errors occur.

48B5

Memory

Operating Voltage

Indicates all DIMMs in the system are operating at

1.25 volts.

48C0

Frequency Ratio Sets frequency multiplier as maximum level.

48C1

Frequency Ratio Downgrades frequency multiplier one level.

48C2

Frequency Ratio Downgrades frequency multiplier two levels.

48C3

Frequency Ratio Downgrades frequency multiplier three levels.

48C8

QPI Frequency

Sets the QPI frequency runs at maximum speed.

48C9

QPI Frequency

Sets the QPI frequency runs at 4.800GT.

48CA

QPI Frequency

Sets the QPI frequency runs at 5.866GT.

48CB

QPI Frequency

Sets the QPI frequency runs at 6.400GT.

Table 2-1. D4 Token Table

(continued)

Token

Setup Option

Description

Summary of Contents for PowerEdge C8220

























































































































































































































































Search results

Summary of Contents for PowerEdge C8220

Reviews:

Brands by name

Popular brands

Dell PowerEdge C8220, Hardware Owner'S Manual

Search results

Summary of Contents for PowerEdge C8220

Reviews:

Brands by name

Popular brands