manualshive.com logo in svg

Dell PowerEdge C8220, Hardware Owner'S Manual

Share
Download
Dell PowerEdge C8220 Hardware Owner'S Manual Download Page 100

100

Using the System Setup Program

Exit Menu

Scroll to this item and press <Enter> to view the following screen.

Exit Options

Option

Description

Save Changes and Exit

Highlight this item and press <Enter> to save any 

changes that you have made in the Setup utility and 

exit the Setup utility. When the Save Changes and Exit 

dialog box appears, press <Y> to save the changes and 

exit, or press <N> to return to the setup main menu.

Discard Changes and Exit

Highlight this item and press <Enter> to discard any 

changes that you have made in the Setup utility and 

exit the Setup utility. When the Discard Changes and 

Exit dialog box appears, press <Y> to discard changes 

and exit, or press <N> to return to the setup main 

menu.

Summary of Contents for PowerEdge C8220

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands