manualshive.com logo in svg

Dell PowerEdge C6220, Hardware Owner'S Manual

The Dell PowerEdge C6220 is an advanced server system designed for high-performance computing. To ensure a smooth and hassle-free installation process, make use of the comprehensive Installation Manual available for free download at manualshive.com. This manual provides step-by-step instructions and valuable insights for maximizing the potential of this remarkable product.

Share
Download
background image

 

Installing System Components | 75 

 
 

Prefetch Configuration 

 

 

Option 

Description 

Adjacent Cache Prefetch 
(

Enabled

 default) 

Includes MLC Spatial Prefetcher. 

Disabled - The processor will only fetch the cache line 
that contains the data currently required by processor. 

Enabled - Enables the processor to fetch the adjacent 
cache line in the other half of the sector. 

Hardware Prefetcher 
(

Enabled

 default) 

Includes MLC Stremaer Prefetcher. 

Enables/ Disables the Hardware Prefetcher. 

DCU Streamer Prefetcher 
(

Enabled

 default) 

This field enables/ disables the DCU Streamer 
Prefetcher. (Invisible if CPU do not support.) 

DCU IP Prefetcher 
(

Enabled 

default) 

This field enables/ disables the DCU IP Prefetcher. 
(Invisible if CPU do not support.) 

Summary of Contents for PowerEdge C6220





























































































































































































































































































































Reviews:

No comments

Related manuals for PowerEdge C6220

Acer Veriton 5800 Manuel D'Utilisation preview
Veriton 5800
Brand: Acer Pages: 106
Acer Veriton 2800 Manual Do Utilizador preview
Veriton 2800
Brand: Acer Pages: 83
Acer Veriton 2800 Guía Del Usuario preview
Veriton 2800
Brand: Acer Pages: 81
Acer Veriton 2800 Service Manual preview
Veriton 2800
Brand: Acer Pages: 89
Acer T230H - Bmidh Wide Touch Screen Display Buyer'S Manual preview
T230H - Bmidh Wide Touch Screen Display
Brand: Acer Pages: 12
Acer Veriton 6800 User Manual preview
Veriton 6800
Brand: Acer Pages: 100
IBM A40 TYPE 6840 (Arabic) User Manual preview
A40 TYPE 6840
Brand: IBM Pages: 160
Tangent T22B Basic Operation Manual preview
T22B
Brand: Tangent Pages: 2
Elo TouchSystems EloView Engine Quick Installation Manual preview
EloView Engine
Brand: Elo TouchSystems Pages: 2
C&T VCO-6020-1050TI User Manual preview
VCO-6020-1050TI
Brand: C&T Pages: 79
Biostar IDEQ 200T User Manual preview
IDEQ 200T
Brand: Biostar Pages: 60
Moxa Technologies V2401 User Manual preview
V2401
Brand: Moxa Technologies Pages: 42
Sun Microsystems Ultra 25 Getting Started Manual preview
Ultra 25
Brand: Sun Microsystems Pages: 14
Sun Microsystems Sun Ultra 450 Manual preview
Sun Ultra 450
Brand: Sun Microsystems Pages: 45
Compaq d260 - Microtower Desktop PC Illustrated Parts Map preview
d260 - Microtower Desktop PC
Brand: Compaq Pages: 1
Dell Inspiron 3470 Owner'S Manual preview
Inspiron 3470
Brand: Dell Pages: 51
Dell INSPIRON Inspiron 1100 Owner'S Manual preview
INSPIRON Inspiron 1100
Brand: Dell Pages: 95
Dell Inspiron 24-5400 Setup And Specifications preview
Inspiron 24-5400
Brand: Dell Pages: 26

Brands by name

Popular brands

Load more brands