Dell PowerEdge 2450, Installation And Troubleshooting Manual

Page: 86 / 166

8-10 Dell PowerEdge 2450 Systems Installation and Troubleshooting Guide
2. Slide the terminator card up and out of the guide bracket assembly (see Figure 8-
7).
*)$
To install a terminator card, align the notch on the terminator card with the socket on
the guide bracket assembly and guide the card into the empty guide bracket
assembly.
! "!#$%
To remove the SEC cartridge and heat sink assembly, perform the following steps.
%
!""#$
1'&' (*.-+*2+
* -+
+-
1'&+* (*.-+.
/*.
&'( )**(+,*#
*
1. Open the computer doors.
2. Pull the tab on one side of the guide bracket away from the end of the heat sink
and pull up slightly on the cartridge (see Figure 8-8).
terminator card
tabs (2)
guide bracket assembly
socket