Steps
1. Align the screw holes on the left fan (FAN2) with the screw holes on the system board and palm-rest and keyboard
assembly.
2. Replace the two screws (M2x4) that secure the left fan (FAN2) to the system board and palm-rest and keyboard assembly.
3. Replace the screw (M1.6x4) that secures the left fan (FAN2) to the system board and palm-rest and keyboard assembly.
4. Connect the left fan cable to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Heat sink
Removing the heat sink (for computers shipped with integrated
graphics card)
Prerequisites
Before working inside your computer
.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The
oils in your skin can reduce the heat transfer capability of the thermal grease.
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch it.
2. Remove the
.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
32
Removing and installing components
