Dell P82G Service Manual Download Page 7

Page: 7 / 79

Before working inside your computer

NOTE:

The images in this document may differ from your computer depending on the configuration you ordered.

Before you begin

1. Save and close all open files and exit all open applications.

2. Shut down your computer. Click

Start

Power

Shut down

NOTE:

If you are using a different operating system, see the documentation of your operating system for shut-down

instructions.

3. Disconnect your computer and all attached devices from their electrical outlets.
4. Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
5. Remove any media card and optical disc from your computer, if applicable.

Safety instructions

Use the following safety guidelines to protect your computer from potential damage and to ensure your personal safety. Unless
otherwise noted, each procedure included in this document assumes that you have read the safety information that shipped
with your computer.

WARNING:

Before working inside your computer, read the safety information that is shipped with your

computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

WARNING:

Disconnect your computer from all power sources before opening the computer cover or panels.

After you finish working inside the computer, replace all covers, panels, and screws before connecting your
computer to an electrical outlet.

CAUTION:

To avoid damaging the computer, ensure that the work surface is flat, dry, and clean.

CAUTION:

To avoid damaging the components and cards, handle them by their edges, and avoid touching the

pins and the contacts.

CAUTION:

You should only perform troubleshooting and repairs as authorized or directed by the Dell technical

assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the
safety instructions that is shipped with the product or at

www.dell.com/regulatory_compliance

CAUTION:

Before touching anything inside your computer, ground yourself by touching an unpainted metal

surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
surface to dissipate static electricity which could harm internal components.

CAUTION:

When you disconnect a cable, pull it by its connector or its pull tab, not the cable itself. Some cables

have connectors with locking tabs or thumbscrews that you must disengage before disconnecting the cable.
When disconnecting cables, keep them evenly aligned to avoid bending the connector pins. When connecting
cables, ensure that the ports and the connectors are correctly oriented and aligned.

CAUTION:

Press and eject any installed card from the media-card reader.

NOTE:

The color of your computer and certain components may appear differently than shown in this document.

Before working inside your computer