Dell P3418HW User Manual Download

Page: 62 / 64

│

Troubleshooting

Universal Serial Bus (USB) Specific Problems

Common
Symptoms

What You
Experience

Possible Solutions

USB interface is not
working

USB peripherals are
not working

• Check that your monitor is turned

ON.

• Reconnect the upstream cable to

your computer.

• Reconnect the USB peripherals

(downstream connector)

• Switch off and then turn on the

monitor again.

• Re-start the computer.
• Some USB devices like external

portable HDD require higher electric
current; connect the device directly
to the computer system.

High Speed USB 3.0
interface is slow.

High Speed USB 3.0
peripherals working
slowly or not working
at all

• Check that your computer is USB

3.0-capable.

• Some computers have both USB

3.0 and USB 2.0 and USB 1.1 ports.
Ensure that the correct USB port is
used.

• Reconnect the upstream cable to

your computer.

• Reconnect the USB peripherals

(downstream connector).

• Re-start the computer.

Wireless mouse
is not working or
lagging

Do not respond or
responds slowly

• Increase the distance between the

USB 3.0 peripherals and the wireless
USB receiver.

• Position your wireless USB receiver

as close as possible to the wireless
mouse.

• Use a USB-extender cable to position

the wireless USB receiver as far away
as possible from the USB 3.0 port.

Summary of Contents for P3418HW

































































Search results

Summary of Contents for P3418HW

Reviews:

Related manuals for P3418HW

Brands by name

Popular brands

Dell P3418HW, User Manual

Search results

Summary of Contents for P3418HW

Reviews:

Related manuals for P3418HW

Brands by name

Popular brands