background image

Great user manuals database on 

UserManuals.info

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

3.

Remove the display bezel (see 

Removing the Display Bezel

).  

 

 

  

4.

Remove the display panel (see 

Removing the Display Panel

).  

 

 

  

5.

Remove the four screws (two on each side) that secure the display-panel brackets to the display panel.  
 

 

  

6.

Remove the display-panel brackets off the display panel.  
 

  

 

 

Replacing the Display-Panel Brackets 

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Place the display-panel brackets in position.  
 

 

  

3.

Replace the four screws (two on each side) that secure the display-panel brackets to the display panel.  
 

 

  

4.

Replace the display panel (see 

Replacing the Display Panel

).  

 

 

  

5.

Replace the display bezel (see 

Replacing the Display Bezel

).  

 

 

  

6.

Replace the display assembly (

Replacing the Display Assembly

).  

 

 

 

Back to Contents Page

 

 

 

display panel brackets (2) 

screws (4) 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for P12G























































Reviews: