Dell P12G Service Manual Download Page 10

Page: 10 / 54

Great user manuals database on

UserManuals.info

Back to Contents Page

Coin-Cell Battery

Dell™ XPS™ L401X Service Manual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

Removing the Coin-Cell Battery

Follow the instructions in

Before You Begin

Remove the battery (see

Removing the Battery

Remove the memory module(s) (see

Removing the Memory Module(s)

Remove the hard drive (see

Removing the Hard Drive

Follow the instructions from

step 4

step 6

Removing the Optical Drive

Remove the palm-rest assembly (see

Removing the Palm-Rest Assembly

Disconnect the coin-cell battery cable from the system-board connector.

The coin-cell battery is glued to a slot on the top cover. Using a plastic scribe, gently pry the coin-cell battery off the slot.

Replacing the Coin-Cell Battery

Follow the instructions in

Before You Begin

Connect the coin-cell battery cable to the system-board connector.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

coin-cell battery

coin-cell battery cable

Summary of Contents for P12G























































Search results

Summary of Contents for P12G

Reviews:

Related manuals for P12G

Brands by name

Popular brands

Dell P12G, Service Manual

Search results

Summary of Contents for P12G

Reviews:

Related manuals for P12G

Brands by name

Popular brands