Great user manuals database on
6.
Remove the memory module from the memory-module connector.
Replacing the Memory Module(s)
1.
Follow the instructions in
.
2.
Align the notch in the memory module with the tab in the memory- module connector.
3.
Slide the memory module firmly into the memory-module connector at a 45-degree angle, and press the memory module down until it clicks into place. If
you do not hear the click, remove the memory module and reinstall it.
4.
Align the tabs on the memory-module cover with the slots on the base cover and snap the memory-module cover into place.
5.
Tighten the two captive screws that secure the memory-module cover to the base cover.
6.
Replace the battery (see
7.
Connect the AC adapter to your computer and an electrical outlet.
8.
Turn on the computer.
1
memory-module connector
2
securing clips (2)
3
memory module
CAUTION:
If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you
install a memory module in the connector labeled "DIMM B".
NOTE:
If the memory module is not installed properly, the computer may not boot.
1
tab
2
notch
3
memory-module connector
