Great user manuals database on
Removing the Display Panel
1.
Follow the instructions in
.
2.
Remove the display assembly (see
).
3.
4.
Disconnect the camera cable from the connector on the camera module.
5.
Remove the eight screws that secure the display panel to the display back cover.
6.
Note the routing of the Mini-Card antenna cables and remove them from the routing guides on the hinge.
7.
Note the routing of the display cable and remove it from the routing guide on the hinge.
8.
Lift the display panel off the display back cover.
Replacing the Display Panel
1.
Follow the instructions in
.
2.
Place the display panel over the display back cover.
3.
Connect the camera cable to the connector on the camera module.
4.
Route the display cable through the routing guide on the hinge.
5.
Route the Mini-Card antenna cables through the routing guide on the hinge.
6.
Replace the eight screws that secure the display panel to the display back cover.
7.
Replace the display bezel (see
8.
Replace the display assembly (see
Replacing the Display Assembly
Display Cable
1
camera cable connector
2
screws (8)
3
display
4
hinges (2)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.