4-4
Dell OptiPlex Gs and Gs+ Low-Profile Systems Reference and Installation Guide
7.
Repeat steps 5 and 6 for any other configuration
settings you want to change.
8.
When you have made all your changes, press
<
TAB
> until
OK
is highlighted. Then press
<
ENTER
>.
9.
To exit the Install program, select
QUIT
from the
menu bar.
I
nstalling a Network Driver
If your system is configured as a DOS ODI client work-
station connected to a NetWare server, the drivers are
installed automatically by following the steps in “Using
Install in a Novell NetWare Environment” found earlier
in this chapter. For other network operating systems, you
must install the appropriate network driver by following
these steps:
1.
Complete steps 1 through 4 in “Configuring the
NIC” found earlier in this chapter.
2.
At the Main Menu, select
NETWORK DRIVERS
and
press <
ENTER
>.
3.
Select the appropriate driver for your network
operating system, and specify the drive and direc-
tory where you want it installed.
4.
Instructions for configuring the drivers are con-
tained in text (.txt) files in the c:\dell\3com directory
and its subdirectories. For a list of files, type
dir/s *.txt
and press <
ENTER
>.
Most of these files can be displayed from within the
Install program by selecting the menu option to
which they pertain. For additional instructions, see
the documentation that accompanied your network
operating system.
NetWare 4.0 Server Drivers
In addition to workstation drivers, your NIC software
includes a NetWare 4.0 server driver and five NetWare
Loadable Modules (NLMs) that allow the NetWare
server driver to be used with NetWare 3.1x software.
Table 4-1. Configuration Setting Options
Configura-
tion Setting
Default
Option
Available Options
I/O base
address
300h
200h, 210h, 220h,
230h, 240h, 250h,
260h, 270h, 280h,
290h, 2A0h, 2B0h,
2C0h, 2D0h, 2E0h,
2F0h, 300h, 310h,
320h, 330h, 340h,
350h, 360h, 370h,
380h, 390h, 3A0h,
3B0h, 3C0h, 3D0h,
3E0h
IRQ line
10
3, 5, 7, 9, 10, 11,
12, 15
Boot PROM
Disabled
*
Disabled, 8 KB,
16 KB, 32 KB
Transceiver
type
On-board
twisted
pair
*
On-board coax
(BNC), on-board
twisted pair (RJ45),
external (AUI/DIX),
autoselect
Network
driver
DOS
client
DOS client, Windows
or OS/2 client, server
Maximum
modem speed
(fastest
modem
installed)
9600
baud
No modem; 1200;
2400; 9600; 19,200;
38,400 baud
Plug and Play
Enabled
Enabled, disabled
*
Do not change this configuration setting from its
default option.
NOTE: For the full name of an abbreviation or acronym
used in this table, see the Glossary in the online System
User’s Guide.
93816BK0.BK : 93816c40.frm Page 4 Monday, September 16, 1996 1:21 PM
