manualshive.com logo in svg

Dell OptiPlex 990 Desktop, Service Manual, Page: 79 / 94

Share
Download
Dell OptiPlex 990 Desktop Service Manual Download Page 79

No timer tick interrupt

Description

A chip on the system board might be malfunctioning.

Non-system disk or disk error

Description The floppy disk in drive A does not have a bootable operating

system installed on it. Either replace the floppy disk with one that

has a bootable operating system, or remove the floppy disk from

drive A and restart the computer.

Not a boot diskette

Description The operating system is trying to boot to a floppy disk that does

not have a bootable operating system installed on it. Insert a

bootable floppy disk.

Plug and play configuration error

Description The computer encountered a problem while trying to configure

one or more cards.

Read fault

Description The operating system cannot read from the floppy or hard drive,

the computer could not find a particular sector on the disk, or the

requested sector is defective.

Requested sector not found

Description The operating system cannot read from the floppy or hard drive,

the computer could not find a particular sector on the disk, or the

requested sector is defective.

Reset failed

Description

The disk re-set operation failed.

Sector not found

Description The operating system cannot locate a sector on the floppy or

hard drive.

79

Summary of Contents for OptiPlex 990 Desktop































































































Reviews:

No comments