Dell OptiPlex 990 Desktop Service Manual Download Page 67

Page: 67 / 94

LED

Power Button

Problem

Description

Memory modules are detected, but a memory power

failure has occurred.

Troubleshooting

Steps

• If two or more memory modules are installed, remove

the modules, then re-install one module and re-start

the computer. If the computer starts normally,

continue to install additional memory modules (one at

a time) until you have identified a faulty module or

reinstalled all modules without error. If only one

memory module is installed, try moving it to a different

DIMM connector and re-start the computer.

• If available, install verified working memory of the

same type into your computer.

LED

Power Button

Problem Description

BIOS may be corrupt or missing.

Troubleshooting Steps The computer hardware is operating normally but the

BIOS may be corrupt or missing.

LED

Power Button

Problem Description

A possible system board failure has occurred.

Troubleshooting

Steps

Remove all peripheral cards from the PCI and PCI-E

slots and re-start the computer. If the computer boots,

Summary of Contents for OptiPlex 990 Desktop































































































Search results

Summary of Contents for OptiPlex 990 Desktop

Reviews:

Related manuals for OptiPlex 990 Desktop

Brands by name

Popular brands

Dell OptiPlex 990 Desktop, Service Manual

Search results

Summary of Contents for OptiPlex 990 Desktop

Reviews:

Related manuals for OptiPlex 990 Desktop

Brands by name

Popular brands