Dell OptiPlex 990 Desktop Service Manual Download Page 66

Page: 66 / 94

• Ensure that the main power cable and front panel

cable are securely connected to the system board.

LED

Power Button

Problem Description

A possible system board failure has occurred.

Troubleshooting Steps Unplug the computer. Allow one minute for the power

to drain. Plug the computer into a working electrical

outlet and press the power button.

LED

Power Button

Problem

Description

A possible system board, power supply, or peripheral

failure has occurred.

Troubleshooting

Steps

• Power off computer, leaving the computer plugged in.

Press and hold the power supply test button at the

rear of the power supply unit. If the LED next to the

switch illuminates, the problem may be with your

system board.

• If the LED next to the switch does not illuminate,

disconnect all internal and external peripherals, and

press and hold the power supply test button. If it

illuminates, there could be a problem with a

peripheral.

• If the LED still does not illuminate, remove the PSU

connections from the system board, then press and

hold the power supply button. If it illuminates, there

could be a problem with the system board.

• If the LED still does not illuminate, the problem is with

the power supply.

Summary of Contents for OptiPlex 990 Desktop































































































Search results

Summary of Contents for OptiPlex 990 Desktop

Reviews:

Related manuals for OptiPlex 990 Desktop

Brands by name

Popular brands

Dell OptiPlex 990 Desktop, Service Manual

Search results

Summary of Contents for OptiPlex 990 Desktop

Reviews:

Related manuals for OptiPlex 990 Desktop

Brands by name

Popular brands