Dell OptiPlex 990 Desktop Service Manual Download Page 54

Page: 54 / 94

General

Memory Technology, DIMM 1 Size, DIMM 2 Size, DIMM 3

Size, and DIMM 4 Size.

•

Processor Information: Displays Processor Type, Core

Count, Processor ID, Current Clock Speed, Minimum Clock

Speed, Maximum Clock Speed, Processor L2 Cache,

Processor L3 Cache, HT Capable, and 64-Bit Technology.

•

PCI Information: Displays SLOT1, SLOT2, SLOT3, SLOT4

•

Device Information: Displays SATA-0, SATA-1, SATA-2,

SATA-3, and LOM MAC Address.

Boot Sequence

Allows you to specify the order in which the computer
attempts to find an operating system. The options are:

•

Diskette drive

•

USB Storage Device

•

CD/DVD/CD-RW Drive

•

Onboard NIC

•

SATA

•

CD/DVD/CD-RW Drive

Boot List Option

•

Legacy

•

UEFI

Date/Time

Allows you to set the date and time. Changes to the system
date and time take effect immediately.

System Configuration

Integrated NIC

Allows you to enable or disable the integrated network card.
You can set the integrated NIC to:

•

Disabled

•

Enabled (default)

•

Enabled w/PXE

•

Enabled w/ImageServer

NOTE: Depending on the computer and its installed
devices, the items listed in this section may or may not
appear.

Summary of Contents for OptiPlex 990 Desktop































































































Search results

Summary of Contents for OptiPlex 990 Desktop

Reviews:

Related manuals for OptiPlex 990 Desktop

Brands by name

Popular brands

Dell OptiPlex 990 Desktop, Service Manual

Search results

Summary of Contents for OptiPlex 990 Desktop

Reviews:

Related manuals for OptiPlex 990 Desktop

Brands by name

Popular brands