Dell OptiPlex 980 - Desktop Administrator'S Manual Download Page 52

Page: 52 / 101

Back to Contents Page

AMT Configuration

After you completely configure the Intel

Management Engine (ME) feature, you must reboot before configuring the Intel AMT

for a clean system boot. Select the

Intel AMT configuration

option from the

Management Engine BIOS Extension

(MEBx)

main menu. This feature allows you to configure an Intel AMT-capable computer to support the Intel AMT

management features.

NOTE:

You need to have a basic understanding of networking and computer technology terms, such as TCP/IP, DHCP,

VLAN, IDE, DNS, subnet mask, default gateway, and domain name. Explaining these terms is beyond the scope of this

document.

The

Intel AMT Configuration

page appears. Below are quick links to the various sections.

Manageability Feature Selection

SOL/IDER

Username and Password

SOL

Redirection Mode

Previous Menu

KVM Configuration

KVM Feature Selection

User Opt-in

Opt-in Configurable from remote IT

Previous Menu

The

Intel AMT Configuration

page contains the user-configurable options listed below.

Manageability Feature Selection

Under the Main Menu, select

Intel AMT Configuration

and press

Enter

. The Main Menu changes to the Intel AMT

Configuration page.

Under the Intel AMT Configuration menu, select

Manageability Feature Selection

and press

Enter

Summary of Contents for OptiPlex 980 - Desktop






































































































Search results

Summary of Contents for OptiPlex 980 - Desktop

Reviews:

Brands by name

Popular brands

Dell OptiPlex 980 - Desktop, Administrator'S Manual

Search results

Summary of Contents for OptiPlex 980 - Desktop

Reviews:

Brands by name

Popular brands