manualshive.com logo in svg

Dell OPTIPLEX 9010 ALL-IN-ONE, Owner'S Manual, Page: 61 / 79

Share
Download
Dell OPTIPLEX 9010 ALL-IN-ONE Owner'S Manual Download Page 61

Option

Description

•

Block Sleep (S3 state) - This option is disabled by default.

Table 19. POST Behavior

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots.

•

Enable Numlock (default)

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots.

•

Enable Keyboard Error Detection (selected by default)

POST Hotkeys

Specifies whether the sign-on screen displays a message, that displays the keystroke 
sequence required to enter the BIOS Boot Option Menu.

•

Enable F12 Boot Option menu (selected by default)

Fastboot

This option can speed up the boot process bypassing some compatibility steps.

•

Minimal

•

Thorough

•

Auto

Table 20. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the 
additional hardware capabilities provided by Intel Virtualization technology.

•

Enable Intel Virtualization Technology (selected by default)

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional 
hardware capabilities provided by Intel

®

 Virtualization technology for direct I/O.

•

Enable Intel VT for Direct I/O (selected by default)

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can 
utilize the additional hardware capabilities provided by Intel Trusted Execution 
technology. The TPM virtualization technology, and Virtualization technology for 
direct I/O must be enabled to use this feature.

•

Trusted Execution - This option is disabled by default.

Table 21. Wireless

Option

Description

Wireless Device Enable

This option allows enabling/disabling of internal wireless devices.

•

WLAN

61

Summary of Contents for OPTIPLEX 9010 ALL-IN-ONE
















































































Reviews:

No comments