Dell OPTIPLEX 9010 ALL-IN-ONE Owner'S Manual Download Page 47

Page: 47 / 79

Option

Description

•

CD/DVD/CD-RW Drive

•

Onboard NIC (Portables enables, Desktop

disables)

Boot List Option

•

Legacy

•

UEFI

Date/Time

This option controls the system date and time. Changes to
the date and time take effect immediately.

•

MM /DD /YY

•

HH: MM: SS: A/P

Battery Information

Displays each battery graphically with the percent
charged, charging state, Health, and AC adapter
information.

Table 3. System Configuration

Option

Description

Integrated NIC

This option controls the on-board LAN Controller.

•

Disabled — The internal LAN is off and not visible top the operating system.

•

Enabled — The internal LAN is enabled.

•

Enabled w/PXE (selected by default) — The internal LAN is enabled (with

PXE boot).

•

Enabled w/ImageServer — The internal LAN is enabled (with ImageServer

boot).

SATA Operation

This option configures the operating mode of the integrated SATA hard drive
controller.

•

Disabled — SATA controllers are hidden.

•

ATA — SATA is configured for ATA mode.

•

AHCI (selected by default) — SATA is configured for AHCI.

•

RAID On — configured to support RAID mode (Intel Rapid Restore

Technology).

Drives

This option lets you enable or disable various drives on board. By default the options
are enabled.

•

SATA-0

•

SATA-1

SMART Reporting

This field controls if the hard drive errors for the integrated drives are reported
during system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification.

•

Enable SMART Reporting - This option is disabled by default.

Summary of Contents for OPTIPLEX 9010 ALL-IN-ONE
















































































Search results

Summary of Contents for OPTIPLEX 9010 ALL-IN-ONE

Reviews:

Related manuals for OPTIPLEX 9010 ALL-IN-ONE

Brands by name

Popular brands

Dell OPTIPLEX 9010 ALL-IN-ONE, Owner'S Manual

Search results

Summary of Contents for OPTIPLEX 9010 ALL-IN-ONE

Reviews:

Related manuals for OPTIPLEX 9010 ALL-IN-ONE

Brands by name

Popular brands