manualshive.com logo in svg

Dell OPTIPLEX 9010 ALL-IN-ONE, Owner'S Manual, Page: 59 / 79

Share
Download
Dell OPTIPLEX 9010 ALL-IN-ONE Owner'S Manual Download Page 59

Table 16. Secure Boot

Option

Description

Secure Boot

Allows to Enable/Disable Secure Boot.

Expert Key Management

This gives the choice of Expert Key Management and Custom Mode Key 
Management.

•

Expert Key Management

•

Enable Custom Mode

•

Custom Mode Key Management

•

PK

•

KEK

•

db

•

dbx

Table 17. Performance

Option

Description

Multi Core Support

Specifies whether the process will have one or all cores enabled. The performance of 
some applications will improve with the additional cores.

•

All (selected by default)

•

1

•

2

Intel Speed Step

Allows you to enable or disable the Intel SpeedStep mode of the processor.

•

Enable Intel SpeedStep (selected by default)

C States Control

Allows you to enable or disable the additional processor sleep states.

•

C states (selected by default)

Intel TurboBoost

Allows you to enable or disable Intel TurboBoost mode of the processor.

•

Enable Intel TurboBoost (selected by default) — Allows the Intel TurboBoost 

driver to increase the performance of the CPU or graphics processor.

Hyperthread Control

This options allows users to enable and disable the Hyperthread Control.

•

Hyperthread Control (selected by default)

HDD Protection Support

Allows you enable or disable the hard disk drive protection card.
HDD Protection Card - Enable/Disable

Table 18. Power Management

Option

Description

AC Recovery

Specifies how the computer will respond when AC power is applied after an AC 
power loss. You can set the AC Recovery to:

•

Power Off (selected by default)

59

Summary of Contents for OPTIPLEX 9010 ALL-IN-ONE
















































































Reviews:

No comments