2. Install the following components:
a)
b)
c)
d)
3. Follow the procedure in
After working inside your computer
.
NOTE:
If the processor is replaced, use the thermal grease provided in the kit to ensure that thermal conductivity is
achieved.
Base cover
Removing the base cover
1. Follow the procedure in
Before working inside your computer
.
2. Remove the following components:
a)
b)
c)
d)
3. Remove the four screws (M3x5) that secure the base cover to the display assembly base.
Removing and Installing components
53
Summary of Contents for OptiPlex 5270 All-in-One
Page 1: ...Dell OptiPlex 5270 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 54: ...4 Pry and lift the base cover off the middle frame 54 Removing and Installing components ...
Page 58: ...b Slide the PSU and lift it away from the chassis 58 Removing and Installing components ...
