3. Install the
4. Follow the procedure in
After working inside your computer
Stand
Removing the stand
The following procedure applies only to systems that are shipped with a Height adjustable stand (HAS) stand :
1. Follow the procedure in
Before working inside your computer
.
2. To avoid damaging the display, place the system on a flat, soft, and clean surface .
3. To remove the stand:
a) Press and slide the release tab forward on the cover [1].
b) Hold the tab in the release position and lift the stand upward [2].
c) Slide downward to lift the stand off the back cover [3].
20
Removing and Installing components
Summary of Contents for OptiPlex 5270 All-in-One
Page 1: ...Dell OptiPlex 5270 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 54: ...4 Pry and lift the base cover off the middle frame 54 Removing and Installing components ...
Page 58: ...b Slide the PSU and lift it away from the chassis 58 Removing and Installing components ...
